Book a check soon
- Wipers slower than before or slowing on the up stroke.
- Wrong park position with the blades resting up the glass.
- Grinding or clunking from below the windscreen.
- Auto wipers acting oddly on cars with a rain sensor.
Wipers slow, stuck halfway, parking in the wrong place or not working at all? It rarely rains in Dubai, so wiper faults often show up at the worst moment. We check the fuse, switch, linkage and rain sensor first, then replace the motor or linkage that has failed.
Jetta wiper motor replacement from AED 500. Indicative Dubai budget. Motor, linkage and control faults need different repairs; the tests determine which applies.

A failing VW Jetta wiper motor causes slow wipers, wipers stuck mid screen, a wrong park position or no movement. A stiff linkage is one possible cause, alongside motor, power supply or control faults. Volkswagen Repair Dubai in Al Quoz 4 tests the switch, fuse, linkage and rain sensor, and replaces Jetta wiper motors from about AED 500.
The motor fitted guide is AED 500–1,200; linkage replacement is AED 400–900. Repairability and the parts supplied determine the suitable option.
| Item | Guide price |
|---|---|
| Wiper motorFitted and park position set | AED 500 to 1,200 |
| Wiper linkageIf the linkage has seized | AED 400 to 900 |
| Wiper bladesPair of front blades | AED 100 to 250 |
| Switch or sensor faultIf the motor tests fine | Quoted after testing |
Indicative guides, not fixed tariffs. The quote identifies the correct assembly, brand, fitting, park-position setup, checks, VAT and diagnosis. Motor and linkage estimates are separate options; confirm whether an assembly already includes both before adding charges. Blades are an optional separate item when needed.
Tell us which modes work and what the wipers do. These optional details help plan the checks and complete quote.
Storage, corrosion, contamination or wear can affect the mechanism. These symptoms guide checks rather than identify a failed motor.
A seized linkage makes a healthy motor work harder until it fails. Freeing or replacing the linkage early can save the motor. See our wiper blade guide for blade care in the heat.
The parts and coding depend on the year and whether your Jetta has a rain sensor.
| Generation | Front wiper system | Rain sensor | Coding |
|---|---|---|---|
| Jetta Mk52005 to 2010 | Motor and linkage under the scuttle | On some trims | Not usually needed |
| Jetta Mk62011 to 2018 | Motor and linkage under the scuttle | On some trims | Not usually needed |
| Jetta Mk72019 onwards | Motor and linkage under the scuttle | Common | Rain sensor checked with VW software |
For an automatic-only fault, inspect the rain-sensor optical coupling and glass, relevant data and control inputs. Manual-speed operation helps distinguish it from a motor or linkage fault.
A straightforward confirmed replacement can take around one to two hours after parts confirmation. Wiring, intermittent control faults or difficult access can extend the job.
Service information by Volkswagen Repair Dubai, an independent workshop in Al Quoz 4. Updated 20 October 2026. About our workshop.

Dust, sand and summer heat do most of the damage while the wipers sit still. A few small habits help the motor last.
Straight answers before you book your Jetta in.
These symptoms need power, ground, control, park-feedback and linkage checks. A good fuse alone does not prove the motor is faulty.
Plan around AED 500 to 1,200 fitted. A seized linkage alone is about AED 400 to 900.
A humming motor or slow arms can involve a stiff, disconnected or damaged mechanism, or a motor fault. Check linkage freedom and load along with motor supply and command before choosing the repair.
Possible causes include mechanism wear or corrosion, damaged arms, motor faults, supply problems or control inputs. A stiff linkage can overload a motor, but Dubai use alone does not establish the cause.
Do not drive when rain, spray, dirt or obstructing blades prevent a clear view. Stop safely and arrange repair or assistance. Assess a failed system before a journey that may require it.
A straightforward confirmed replacement can take around one to two hours after parts confirmation. Wiring, intermittent control faults or difficult access can extend the job.
Tell us which speeds work, where the blades stop and whether auto mode alone is affected; the year helps if known. We explain the next checks and quote before replacement.